10 kg Spool Roller for Pastamatic - Filament Spool Winder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Upgrade to hold 10 kg spool on loading end of Pastamatic - Filament Spool Winder.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 515
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I created this because I happened across a great deal for 10 kg spools that had some humidity and couldn't fit them into my dehydrator. This model is an addition to the Pastamatic winder that latches on just like the original unspooling end.
To assemble, slide 608 skate bearings on the end of each roller (four total) and place the two rollers into the base. Slide the connecting rod through the base and two connectors then the latch the connectors onto the original body.
I recommend using silicone grease on every moving component as the 10 kg spool adds a lot of stress on the filament as you rewind.