1 / 5
120mm Fan Adapter for Thermalright AXP-47 (no ram height restriction)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use this to attach a 120mm fan to the AXP-47. Clips right on only 4 screws are needed to secure the fan to the bracket.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 542
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I changed out my GPU from a 3-slot card to a 2-slot card, didn't want to buy a new cooler and thus this bracket was born.
This bracket was designed to clear the tall heatsinks of the Gigabyte b650I Aorus Ultra motherboard without restricting ram height. There is a total of 48mm of clearance for motherboard heatsinks.
If you are using this in the Formd t1 it will fit in 2.25 slot mode with a 25mm thick fan or 2.75 slot mode with a 15mm thick fan.
