1 / 2
Closet Backpack Hanger
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A closet hanger for a typical backpack.
- Ocena
- 5 / 5
- Polubienia
- 55
- Pobrania
- 135
- Wydruki
- 4
- Wyświetlenia
- 1128
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 4) (Komentarze: 4)Remiksy (0)Kolekcje (84)Powiązane
A closet hanger for a typical backpack.
Printing:
- Print in PETG or PC.
- Note: PLA, ABS, ASA are not recommended.
- 0.4mm nozzle, 0.2mm height, 6 walls, 25%+ infill
- Supports needed for the flat part of the overhang (see 3mf)
Assembly:
- None
Materials:
Revision Log:
Rev0 - Initial release
Note: Amazon links are affiliates.