Pen Microscope Holder and Rail system
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have a pen microscope that is real pain to use because you have to keep it at an exact distance for it to focus.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 367
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I have a pen microscope that is real pain to use because you have to keep it at an exact distance for it to focus correctly. So I designed a holder and rail system to aid me.
The holder keeps it the correct distance from what ever you are examining and the rails allow you to scan over a section of the part.
The Rail system snaps together like puzzle pieces so you can extend the rails as far as you need. The rails are separated by at least 2 pieces or more to make sure they are the correct distance apart. More can be added if you need stability.
I will be making the 3D files available after I'm done tweaking the design. I can also print one for you if you want one and don't have a 3D printer.
The Microscope I have is similar to this one (Made by the same company):
https://www.amazon.com/Opti.../dp/B00PEZ3GMK/ref=sr_1_30...
Made a quick video here:
https://www.youtube.com/watch?v=g7tZSpN-qZA
It's a snap together design. If the Microscope spins too much in the holder, you can do like I did and add a touch of Hot Glue to keep it from spinning.
The only part that needed support was the Microscope Cross Bar. Everything else was printed without supports. I printed the parts in Hatchbox PLA with a layer height of 0.3.
Updated:
Added different size legs and tweaked the body.