Stanley product #47-064 Marking Gauge Block
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This part is a replacement for the original Stanley Marking Gauge sliding block that typically breaks with age.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
My original scribe/marking gauge from Stanley tools (model 47-064) broke - original styrene plastic cracked in 3 places so I modeled up a replacement after my attempt at salvaging the broken part with epoxy was an epic fail. Its a very basic tool but its handy and I've had it for years …
This prints in PETG with standard profile at 0.2mm layer thickness (0.2 structural profile in slicer). I used my XL to print this but it should print just fine on other printers.
Thread is a ½ - 13 and prints well. Pry off the original little metal slider plate from the original part and glue it back to the new block.
Saved this from the landfill … I think Stanley still make them - on line for like 20 bucks or so.
Original part is shown in photos with cracks where it broke.