Ford Maverick Rear Sent Vent Extender
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an extender that you slide over the vent under the front seats to help redirect the air to the back seat with…
- Ocena
- 5 / 5
- Polubienia
- 57
- Pobrania
- 336
- Wydruki
- 2
- Wyświetlenia
- 1364
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is an extender that you slide over the vent under the front seats to help redirect the air to the back seat with a 30 degree angle. I printed with NO SUPPORTS - standing straight up on the bed with a BRIM to help hold it.
My Maverick has the 3 hole vent as shown in the picture above. I designed this to fit snuggly around the vent and just under the carpet. I also added an internal RIB to give it some rigidity and a stop when you install it.
It should go without saying - print with PETG!
Print Settings
Rafts:
No
Supports:
No
Standard
Category: Automotive