ENJOY Benchy Bottle Opener
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bottle opener, note holder benchy.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial
Ahoy, beer lovers and note-takers, this is something for you! This isn’t just any tiny boat—it’s a fridge magnet, bottle opener, and note holder all in one!
It has a strong, specially profiled bottle opener, designed for your cold beer only. Notes can be stuck to your fridge with its strong magnet or held up using pins.
Download, print, and sail into enjoyment!
Info:
Add support under the nose.
Modify the perimeters near the bottle opener, set them to 5.
Round magnets 6x5 (diameter 6mm, height 5mm) – I use a pentagon or square instead of a cylinder – it’s easier to fit the round shape, and you might need to use glue (feel free to cut the hole as needed).
Through hole for a string, in case you want to make it a keychain. ;)
Layer height – some say that thinner is stronger. I used 0.2mm, and it works fine, but I recommend 0.12-0.16mm.
Print at the highest possible temperature for your filament, as it will also improve strength and durability.