Unifi Cloud Gateway UCG Fiber Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is for the Unifi Cloud Gateway Fiber unit. It's a wall mount that can be positioned several ways.
- Ocena
- 4 / 5
- Polubienia
- 37
- Pobrania
- 795
- Wydruki
- 2
- Wyświetlenia
- 5146
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model was originally on Printables where the creator posted his .step file for editing. It's been mixed a few times but as the smaller Max and Ultra Unifi models. This is for the Unifi Cloud Gateway Fiber unit. It's a wall mount that can be positioned several ways. It also has the sides removed to allow for M.2 drive slot access and a filet for air flow. I like it because it's more flexible than others I have seen, and stays cooler. I'm not an aesthetics kind of guy when it comes to wall mounts for equipment, I just need it to fit and be adjustable, so remix as you see worthy.
The overhangs need supports. If you do auto supports, wait for some cool down before trying to remove them as they are tight.
The unit does sit a little loose in the slot, so if you want it tighter, scale it down to what you want. I've gone down 97% and it was scrapping the sides-tight. Center screw hole was more for positioning but use as you please.
I printed mine in PLA Tough (remember that from Bambu?). I allowed it to anneal for an hour. No issues after a few weeks on the wall. But, you may prefer to do it in PETG.
- 20% gyroid infill
- 3 walls
- arachne wall generation
.20mm Standard on an A1
Happy printing!