Stackable Modularization Monitor Elevator Drawer

Features:

• Suitable for both single and multiple configurations.
•  Can be stacked horizontally or vertically, arranged to your specific needs. 
• Freely customizable color combinations. 
• A robust 6kg weight capacity allows you to confidently place items on top. 
• Only the uppermost drawer requires a top cover, as lower drawers are sealed by those above.

Printing Considerations:

• It is advisable to print with PETG or a material offering superior toughness. 
• Avoid using silk filaments, as they are prone to fracture at the interlocking points. 
• The model's tolerances have been meticulously considered. However, if the drawers do not slide smoothly, lightly sand the top and sides to ensure seamless operation. 
• An external contour compensation has been added to the top cover. Given the variations in materials and printing environments, this compensation may not be entirely accurate. If unsure, download and adjust the height to 1mm or less to test your desired compensation value. 
• Printing configurations have been optimized for immediate use directly from your mobile device. Note that the A1 Mini's size limitations prevent printing the outer shell, but all other components are printable. 
• Given the large surface area contact with the plate and the height of the model, it is recommended to increase the plate temperature to 75 degrees Celsius or higher and clean the build plate to minimize warping issues and ensure print quality.

I have personally printed and refined at least eight iterations of this model using both PLA and PETG, and it is now substantially problem-free. If you encounter any issues during printing, please leave a comment for discussion. Thank you!