Nidavellir - Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Nidavellir - Boardgame Insert
Notes:
- No Supports necessary.
- Additional Parts Needed: 16 4mm x 2mm Magnets
- Designed using Gamegenic Standard Sleeves.
- This holds everything currently available for Nidavellir including both expansions.
This project took many test prints but came together well I think. The Coins pictured are not my -design or print. I purchased them from BurtonDesignWorks on Etsy. The Holders work just as well with the cardboard coins.
With this insert, I have provided both the STLs and my Personal Bambu .3mf for how I printed it. I hope it helps. If you have any questions please do not hesitate to ask. I am always happy to help.
Print the following for Organization:
1x Nid_Bits_Box_v1
1x Nid_Bits_Lid_0.10_v1
1x Nid_Card_Organizer_v1
1x Nidavellir_Coin_Base_v14
1x Nidavellir_Coin_Lid_v14
I designed this to be storable both flat on the bottom and sideways in a Kallax.
Noted Instructions:
All were Printed at .2mm Layer Height. 15% Cubic Infill 5 Top and 3 Bottom Layers