Maxi-Cosi See Pro 360° Baby Monitor Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A printable replacement mount for the Maxi-Cosi See Pro 360° baby monitor. Insert on bottom of camera & twist to attach.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 166
- Wydruki
- 0
- Wyświetlenia
- 744
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 3D-printable replacement mount for the Maxi-Cosi See Pro 360° Baby Monitor. It is designed to match the original mounting piece that comes with the monitor, allowing it to attach by inserting and twisting into the bottom of the camera.
I made two versions of the mount. One version, which I made second, very closely matches the exact mount that comes with the camera. It includes screw holes, a bevel on the bottom of the mount piece and I added filets on the “wings” to also better match the original. The original version I made does not include screw holes, which was designed for remixing into custom mounts. I used it to make a GoPro accessory compatible mount. If you want a version compatible with GoPro mounting hardware, check out my other file upload.
📌 Features:
- Designed to fit the Maxi-Cosi See Pro 360° baby monitor
- Attaches securely by inserting and twisting into place
- This is a tight fit, so you might need to sand/file a few bits depending on your printer tolerances.
- Two version. One with screw holes like the OEM mount and one without screw holes for remixing.
Print Settings:
- Material: I just printed this with basic PLA and have not had any issues
- Supports: I printed this with tree style supports and sanded down the bottom sides of the “wings” to get it to fit.
- Infill: 100% recommended.
Let me know if you remix, improve upon this design, or have feedback ideas! 🚀