Wall Mount for Reolink E1 Zoom PTZ Camera
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple wall mount to allow the E1 Zoom to be hung upside down.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 282
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
A simple wall mount to allow the E1 Zoom to be hung upside down.
I designed this for holding the E1 Zoom above my 3D printer for both recording prints and also monitoring the gym when the printer isn't running.
It should be printed on it's side for max strength.
I've provided a two colour design (that I use) and a solid one if you don't care or can't print two colours (yet! 😉). I don't know how to make an STL that is two colours though so that's just in the 3mf format.
The pics show it with the other E1 Zoom mod I've had to make to point the lense down. By default it doesn't go down low enough. That can be found here: https://www.printables.com/model/1224045-reolink-e1-zoom-ptz-camera-angled-mod.