Nail Tech Lamp Base Riser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Riser for half moon salon nail tech lamp. The height put the light right in the tech's eyes, this rises the lamp by abo
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 304
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Riser for half moon salon nail tech lamp. The height put the light right in the tech's eyes, this rises the lamp by about 65mm with the feet installed (2.5 inches).
This model screws to the base with the original screws. Mounting tape secures the original base to the bottom of the riser.
PETG is recommended for nail salon use, due to the higher UV resistance.
THIS is the lamp style (There are a million variants, but it should fit all of the ones with the crescent shaped feet).
Installation :
-Remove the screw from the bottom of the foot.
-Insert the screw in the hole of the bottom of the riser, it fits snugly to keep it straight.
-Thread screw into original location.
-Use double sided tape to secure original feet to bottom of riser, inside of the lip.