Waterdances doodle #1 - Plane
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's a doodleception; 3d model doodle based on 2d drawing doodle by Waterdance.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 36
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial
Waterdance has been drawing doodle on her stream (https://www.twitch.tv/waterdance) for ages. At the end of 2023 I started to make 3d models based on those, and at start of 2025 there was a request to make one of them printable.
In general, the model is simple to print; its size has been normalized to use a piece of filament as an antenna for mogball - the character being captain of the plane. Windshield is an optional part.
Few parts have overhangs, and for those I recommend enabling supports:
- Mogball_part_1
- Mogball_part_2
- Fuselage_front
- Steerting_stick_1
- Steerting_stick_2
I also recommend adding brim for the following parts since they have a small contact surface to print bed:
- Mogball_part_2
- Steerting_stick_1
- Steerting_stick_2