LED Holder for Plant Propagation
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Start your cultivation season effectively!
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 310
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Story: We started germinating our plants for our balcony. I used my LED-grow lamp (LED grow strips + power cable + LED U-profile) to support the little ones :). However, it wasnt easy to position the LED in the right position and height. Therefore I have designed a holder with different slots at different heights to adjust to the development of the plants.
I have used PETG to be able to resist the heat radiating off the LEDs but you can also use PLA, ABS and ASA filaments:
PLA | |
| SUNLU PLA Plus | Amazon |
| eSUN PLA+ | Amazon |
| Anycubic PLA | Amazon |
PETG | |
| Eryone PETG | Amazon |
| FormFutura - ReForm - rPET | Amazon |
| Elegoo Rapid PETG | Amazon |
ABS | |
| Amazon Basics ABS | Amazon |
| Creality ABS | Amazon |
| OVERTURE ABS | Amazon |
ASA | |
| extrudr® DuraPro ASA | Amazon |
| Polymaker PolyLite ASA | Amazon |
| AzureFilm 3D Black | Amazon |
Please note that the links are affiliate Amazon links. Feel free to click on them to support me. :) Apart from that, you can also support my work by buying me a coffee.
If you print one, please post a make! If you encounter any issues, post a comment. Thanks!