St. Patrick's Day Leprechaun Puzzle Container
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Leprechaun puzzle box for hiding St. Patrick's Day candy (or gold). Print one-color or multi-color.
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 198
- Wydruki
- 2
- Wyświetlenia
- 926
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution — Noncommercial
The maze on this puzzle box is relatively easy and suitable for kids. Make them practice a little patience to get at the St. Pat's treat inside.
Printing
- 0.4mm nozzle
- 0.12mm - 0.2mm layer height
- no supports needed
If you don't have an MMU or want to save on filament wastage, you can print the hat's belt and buckle separately. Then, while the belt-less hat is printing, pause the print just above the top of the belt (at about 13.48mm) and drop the belt and buckle on the hat before resuming. They will be firmly held in place. However, I recommend a dab of glue on the buckle and belt so that they don't move around as the next layer is printed.
The maze-body can also be printed in vase-mode to save on material. If doing vase-mode with a 0.4mm nozzle, use a lower (0.16mm) layer height and increase extrusion width (to 0.78mm).