Inbus / Allen Key and Torx KeyHolder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compact inbus and torx holders to free some space on my wallmount. For standard metric size set 1.5, 2, 2.5, 3, 4, 5, 6.
- Ocena
- 4,818 / 5
- Polubienia
- 83
- Pobrania
- 786
- Wydruki
- 15
- Wyświetlenia
- 2514
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
For standard inbus metric size set 1.5, 2, 2.5, 3, 4, 5, 6.
NEW: Added tighter fit INBUS and new TORX version.
Printing information
I aimed for tighter key fit, worked for me with 0.4mm nozzle and 0.15-0.2mm layerheight.
Added secondary yet tighter fit version. This one is tested with 0.2mm, 3 perimeters, Prusament PLA. As small holes have tendency to shrink during printing, it is difficult to create model that will came from all printers the same perfect fit. If this version is too tight or too loose for your allen keys, try playing with extrusion multiplier.
Like this model?
Check out my other creations here: https://www.printables.com/social/33126-zbynek-ch/models
Support me
If you like this design and want to support me, you can buy me a coffee: https://ko-fi.com/zbynekch