Avatar RPG Combat Deck Box (Sleeved)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Avatar RPG Combat Deck Box (Sleeved)
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 143
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Avatar RPG Combat Deck Box For Sleeved Cards
Notes:
- No Supports Needed.
- Designed using Gamegenic Standard Sleeves.
- For some reason all of my designs import into the Slicer sideways. Make sure to Print with the Bottom down. No Supports should be necessary. (I have Since Learned that this is because of the way I designed it in Fusion360.)
- These are not Print in Place Hinges. Use a short piece of filament as the hinge pin. I used a lighter to melt/mash the end of the filament to keep it in place Everything was Printed at .2 Layer Height. I used a brim on most of my prints.
I created this because I like to sleeve all of my card and there was no Good Storage option. This Design was originally posted to Thangs and I am Consolidating. Original Link: https://thangs.com/mythangs/file/800466
If you have any questions please do not hesitate to ask. I am always happy to help.
Print the following for Organization:
1x Avatar_Card_Box_Bottom_v2
1x Avatar_Card_Box_Top_v4
I designed this to be storable both flat on the bottom and sideways in a Kallax.
Noted Instructions:
All were Printed at .2mm Layer Height. 15% Cubic Infill 5 Top and 3 Bottom Layers