HomeBrewers - Board Game Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
HomeBrewers - Board Game Insert. Designed to hold expansions in the main game box.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
HomeBrewers - Board Game Insert
Notes:
- Supports needed for Player_Tokens_v7.
- Designed using Gamegenic Standard Sleeves.
- This holds everything currently available for HomeBrewers.
- For some reason all of my designs import into the Slicer sideways. Make sure to Print with the Bottom down. No Supports should be necessary. (I have Since Learned that this is because of the way I designed it in Fusion360.)
This Design was originally posted to Thangs and I am Consolidating. Original Link: https://thangs.com/mythangs/file/352211
If you have any questions please do not hesitate to ask. I am always happy to help.
Print the following for Organization:
1x Cards_and_Small_Parts_v5
1x Player_Tokens_v7
1x Getting_Equipped_Expansion_v3
1x Board_Parts_Cards_v3
I designed this to be storable both flat on the bottom and sideways in a Kallax.
Noted Instructions:
All were Printed at .2mm Layer Height. 15% Cubic Infill 5 Top and 3 Bottom Layers