Single D-Cell (LR20) Battery Holder with C-Baby (LR14) Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Remix of Timinator's Design to use LR20 and LR14 within on holder.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 352
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Hi,
I have built a small “battery thief circuit” some time ago to drive a LED-String-Light with a few old, almost empty batteries. Normally I use AA and AAA type batteries. But I grabbed a few “D | LR20 | Mono” and "C-Baby | LR14" cells out of a battery recycling box. I liked Timinator design but i've got other a other size for the battery contacts here. So I used his design as a base for this remix.
my print settings:
- filament = Elegoo Matte PLA black
- 0,3 mm layer height @ 0,4 nozzle
- 3 perimeters
- 10% gyroid infill
- supports: no
For the dummy conncetor to connect the LR14 in the LR20 holder I used 1x M5 nut & 1x screw M5x12 mm.
My battery contacts: here
Happy printing.