Marvel United - Card Board Location Storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Marvel United - Card Board Location Storage
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 232
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Marvel United - Card Board Location Storage
Notes:
- No Supports Needed.
- These are not Print in Place Hinges. Use a short piece of filament as the hinge pin. I used a lighter to melt/mash the end of the filament to keep it in place Everything was Printed at .2 Layer Height. I used a brim on most of my prints.
There are 4 Boxes in Total. Seasons 1&2 were designed together while Season 3 Came Later.
If you have any questions please do not hesitate to ask. I am always happy to help.
Marvel united Seasons 1 &2 Locations:
1x MU_S1andS2_Locations_Top_v0
1x MU_S1and2_Locations_Bottom_v1
Marvel United Seasons 1 & 2 Villains Dashboards:
1x MU_Villains_Dashboards_Top_v1
1x MU_Villains_Dashboards_Bottom_v1
Marvel United Season 3 (Multiverse) Locations:
1x MU_Multiverse_Locations_Top_v0
1x MU_Multiverse_Locations_Bottom_v0
Marvel United Season 3 (Multiverse) Villains Dashboards:
1x MU_Multiverse_Villains_Top_v0
1x MU_Multiverse_Villains_Bottom_v0
I designed this to be storable both flat on the bottom and sideways in a Kallax.
Noted Instructions:
All were Printed at .2mm Layer Height. 15% Cubic Infill 5 Top and 3 Bottom Layers