Kutna Hora - Replacement Card Stands for Sliders
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Kutna Hora - Replacement Card Stands for Sliders
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 88
- Wydruki
- 3
- Wyświetlenia
- 426
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Kutna Hora - Replacement Card Stands for Sliders
Notes:
- Supports are Definitely Needed. I had Really good Luck with the 3mf attached.
I wanted some card stands that would hold up to extra usage and would be stand-up style as opposed to lying down.
With these Components, I have provided both the STLs and my Personal Bambu .3mf for how I printed it. I hope it helps. If you have any questions please do not hesitate to ask. I am always happy to help.
Print the following for Organization:
1x MU_Sent_LrgMini_Storage_v2
1x MU_XLMini_Front_v0
I designed this to be storable both flat on the bottom and sideways in a Kallax.
Noted Instructions:
All were Printed at .2mm Layer Height. 15% Cubic Infill 5 Top and 3 Bottom Layers
I used an insert designed by Tori743 over on Thingiverse: https://www.thingiverse.com/thing:6273745
I used some taller sleeves on my copy of the game and needed to make some adjustments to the design of the insert to allow for my re-designs of the stands and my larger sleeves to fit. You can find my remix here: www.printables.com/model/1225005