Kutna Hora - Insert Remix to Fit Custom Card Stands
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Kutna Hora - Insert Remix to Fit Custom Card Stands
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 37
- Wydruki
- 1
- Wyświetlenia
- 394
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Kutna Hora - Insert Remix to Fit Custom Card Stands
Notes:
- No Supports necessary
- Designed using Gamegenic Standard Sleeves.
This is a Remix of Tori743's Kutna Hora Insert. Their Insert was GREAT. I wanted Custom Card Stands for the Sliders to invert the way they sit. With that re-design and some larger Card Sleeves, I needed to made a small modification to Tori743's fantastic insert.
Tori743's Original Design: https://www.thingiverse.com/thing:6273745
With this insert, I have provided both the STLs and my Personal Bambu .3mf for how I printed it. I hope it helps. If you have any questions please do not hesitate to ask. I am always happy to help.
Print the following for Organization:
2x KH_CardStand_Holder_x2_v0
1x KH_CardHolder_v0
I designed this to be storable both flat on the bottom and sideways in a Kallax.
Noted Instructions:
All were Printed at .2mm Layer Height. 15% Cubic Infill 5 Top and 3 Bottom Layers
If you would like to use my Vertical Card Stands they can be found here: https://www.printables.com/model/1224970-kutna-hora-replacement-card-stands-for-sliders
