1 / 3
Kitchen sink rag holder - for single 12mm tube
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Customizable kitchen sink rag holder for a single 12 tube (aluminum or stainless steel)
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 361
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (1)Kolekcje (16)Powiązane
I really liked the idea I've seen here: https://www.prusaprinters.org/prints/119456-kitchen-sink-rag-holder-hook, but I wanted it to take a bit less space in my sink, so I've designed a similar thing for a single tube. I had a spare 12mm aluminum tube so that's the dimension in the design, but it can be easily tweaked to fit other tubes/rods diameters (use the included source file for Fusion 360, the diameter is set as a parameter).
Dimensions are set to fit Franke Sirius SID 610 (onyx) sink