Simple Anti-Splash Mug Riser for Keurig and other Coffee Makers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reduces the amount of splashing during coffee dispensing by bringing the mug closer to the spout.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 161
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
I was always frustrated with all the splashing and coffee drips everywhere that would happen on my Keurig b/c of the distance from the mug to the spout, since many are designed to accommodate tall thermoses.
I made this simple riser to bring mugs up closer, reducing the amount of splashing. It has four 3x2mm holes on the bottom for magnets to hold it in place for coffee machines that have a metal tray like mine, but aren't entirely necessary.
Most common mugs should sit comfortably on the riser, many mugs have a raised ridge around the outer edge of the bottom, so I accounted for that.
Update: I added a ‘fancier’ pillar-style version to the files.
Print settings were all pretty standard:
0.4mm nozzle, I think I used PETG for the one in the photos, but any filament with your settings should work fine, just be sure to have enough base layers to hold the magnets, if you use them. No support needed.