1 / 3
Pittsburgh 1.5 ton aluiminum racing jack pad adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My floor jack was missing the rubber pad, so I bought one online, which didn't fit. This adapter makes it fit.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 332
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (11)Powiązane
I bought a rubber jack pad online, which turned out to be too large to fit nicely on my jack.
I designed this to print out of TPU and snap onto the jack, and then the jack pad slips over the adapter.
I printed it from 95A TPU with 90% rectilinear infill, and it is performing as expected.