Agent Cooper Hueforge

A Hueforge of Agent Cooper from Twin Peaks drinking a damn fine cup of coffee. Print is sized to 150mm x 150mm so it will fit on smaller printers such as the A1 mini. If you want to scale it up or down, only scale in the x and y axes!

This is meant to be printed with 0.08 layer height and a 0.4 mm nozzle. The black base can be any filament--if you use other filaments from those listed below, the TDs may differ and give you different results. If you don't have an AMS, simply add pauses at the layer heights listed below so you can swap colors. You may add negative cylinders in your slicer if you want to add holes for hanging.

Hueforge Instructions:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA FilaCube Leather Brown Transmission Distance: 5
PLA+ IIID Max Vintage Rose Transmission Distance: 7.4
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Leather Brown
At layer #12 (1.04mm) swap to Vintage Rose
At layer #21 (1.76mm) swap to Jade White for the rest.

I have a Limited Commercial License for Hueforge.