Mazda 6 GH Mio MiVue mirror holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mazda 6 GH auto dimming interior mirror holder for Mio MiVue
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 272
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
EDIT: added Ball_v3, MiVue uni holder, MiVue C380D and 752D holders with lock mechanism
Ball_v3 has 6 holes around and 1 hole in the centre to release pressure when gluing together with holder. Removed “long version”.
Mazda 6 GH auto dimming interior mirror holder for Mio MiVue.
Print with ASA or ABS (high temperatures behind the car front glass).
Use at least 25% infill (more is better for small parts).
All should be printed oriented as is for max strength...
2 versions - SHORT and LONG, some parts are common (nut, ball, tip, base).
Warning - at first attach "nut" to "ball", then glue “ball” with some “holder” using superglue ;-)
Use support for:
holders (normal - snug, just under “T” locking mechanism)
base (tree)
For "base" add some rubber inside buckle part so you will not scratch mirror holder (there is 1mm clerance reserve for this - I used old bycicle tube, check photo)
Screws and nuts used:
2x M4x15, pan head (holder)
2x M4 nut (2x holder)