Bambu Lab X1C/P1S/P1P/A1 Build Plate/Steel Sheet Tiered Stand/Holder/Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tiered storage solution for 6 steel sheets for the Bambu Lab X1C, P1S, P1P, & A1.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 121
- Wydruki
- 0
- Wyświetlenia
- 538
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
After looking over the available options, and there were quite a few of them I really couldn't find any that I was interested in so I came up with this.
It's dual purpose, you can set it up right on a desk/table or you can use the M4 screw passthroughs to mount it on a wall or a wire rack shelf as you see in the pictures.
What I believe makes this a bit unique is it's tiered and the slots are a bit thinner than other designs ensuring a good fit, which helps to minimize the steel sheets rattling around. You can use this with any other steel sheet you want, just keep in mind it was specifically designed to fit Bambu sheets so be sure it will fit your application before printing.
If you decide to mount it to a wire rack shelf I have included some M4 Nut washers which make installation easier. You'll need 3 M4 screws (countersunk) and nuts.