1 / 3
Prusa MK4 Filament Guide 2x and 5x positions with exit bevels and increased exit hole size for 4mm PTFE tubes — zdjęcie 1
1 / 3

Prusa MK4 Filament Guide 2x and 5x positions with exit bevels and increased exit hole size for 4mm PTFE tubes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix

Ocena
0 / 5
Polubienia
5
Pobrania
25
Wydruki
0
Wyświetlenia
163
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Hi, I have been printing since September 2023 and am starting to make original designs and also remix other designs with attribution.  I hope these can help someone out as many of the designs on Printables have helped me.

Here are five and two position filament guides for the Prusa MK4 and MK4S that use P4-M10 fittings.  I increased the temperature setting and lowered the print fan speed some from the Jesse PETG profile for maximum layer adhesion.