1 / 4
Simple hose plugs 6mm, 8mm, 10mm, 12mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple hose plugs 6mm, 8mm, 10mm, 12mm
- Ocena
- 0 / 5
- Polubienia
- 70
- Pobrania
- 423
- Wydruki
- 0
- Wyświetlenia
- 1000
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (80)Powiązane
Description
I needed a simple temporary fix to block a xenon headlamp washer hose while i was working on the unit itselft, so there it is.
I needed a 10mm one, others are just a scaled up or down versions.
It's a tight fit, you might want to scale it down a bit if it does not fit.
Print instructions:
0.20 layer height
5 walls
20-25% infill
use brim
no supports needed
use PETG or ABS/ASA