RollUp bag seal - Print in place
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple to make and use bag seal
- Ocena
- 5 / 5
- Polubienia
- 99
- Pobrania
- 226
- Wydruki
- 1
- Wyświetlenia
- 889
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Inspired by rolltop bags, this seal keeps coffee beans (or any other item in a bag) well protected from the environment. The excess bag is rolled up and the flaps prevent the bag from unraveling on its own. The opening slit is 18 cm long and should fit most coffee bags.
This is a print-in-place model, so no assembly is required. After the print is removed from the bed, some force may be required to break open the hinges for the first time. For best results, keep the orientation of the model so all the (internal) pivots face upwards.
Print Settings I've used:
- PETG (for some flexibility)
- 0.20 mm layer height
- 15% infill
Note: You can print this model on the Prusa Mini, but you have to turn the model by 45° first.