1 / 2
Remix of Airbus Style Throttle Quadrant - Major Update — zdjęcie 1
1 / 2

Remix of Airbus Style Throttle Quadrant - Major Update

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is partly a remix of the named design and some of own designs building an Airbus-style Throttle Quadrant.

Ocena
0 / 5
Polubienia
9
Pobrania
212
Wydruki
0
Wyświetlenia
819
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

As i needed a new throttle quadrant i took this brilliant design and scaled it down to 87% as i needed it a little smaller.
Additionally i changed the design a little according to following of my rules:

- Simplification
- Print more and buy less
- all my modules for my Flight Simulator Homecockpit should be totally self-sufficient and stable, even when not mounted to a plate or any housing. Therefore every module has its own small front plate, with which it will be mounted to a housing.

But i totally kept the original geometry, function and design, therefore the original INO-file should still work, although i'm using an Arduino Leonardo instead of a Pro Micro.

I discarded the original handle and took mine (modified), as my version is more stable, easier to print and to setup.

BOM and Assembly

Please see attached PDF with all information on what you need and how often to print and how to assemble it.

Update January, 10th., 2026

First of all: if you are happy with the old design, keep it. There is no need to upgrade, especially on the Arduino-Files are no changes, which are part of my “Main Pedestal” Objekt.

New / to replace parts: Base-Frame, Base-Pot-Mount, Base-Poti-Gear, Lever-Rod.

If you want to impove it - like i did - you have to print only a few parts new.

Reason: to use almost the whole range of the potis instead only 1/4 to make it more accurate, i changed the rods, the potiholder and the frames.

If you go for the upgrade you have to re-calibrate the whole block.

Tagi