1 / 6
Screwhedral Construction Set
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The printed parts consist of 10 cuboctahedron shaped "hubs", four of each length "link", one box bottom, one box top, and 4 screw retainers. For hardware you will need 144 M5x0.8x 9.5mm heat set inserts, 40-50 M5x0.8 15mm BHCSs, a small amount of 3/4" wide two sided hook and loop strap, and a 3mm hex screwdriver.
Links to some of the components I used:
- Heatset Inserts: https://cnckitchen.store/products/heat-set-insert-m5-x-9-5-50-pieces
- M5 Screws: https://www.mcmaster.com/92095A127/
- Wera 3mm Hex Driver: https://a.co/d/5HGPoxF
- Hook and Loop Strap: https://a.co/d/9waZQCx
Filaments I used: (you don't have to use ABS)
- Atomic Neon Yellow UV Reactive ABS: https://atomicfilament.com/products/neon-yellow-uv-reactive-abs-filament
- Atomic Black ABS: https://atomicfilament.com/products/black-abs-filament
- Overture White PLA: https://a.co/d/5zjt7r8
Enjoy!