Anycubic Mono X Filter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Anycubic Mono X air filter It's designed to pull air from the back vents.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 79
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Created this filter to attach to the back of the Anycubic Mono X Resin Printer.
It's designed to actively pull air from the device's back vents and sit flush against the back.
If your printing areas are not well ventilated, you can add carbon and HEPA filters to eliminate resin odor.
Holds on to the printer via magnets.
The indents on the device are for the following or similar magnets. https://www.amazon.com/dp/B09FSWDBLV?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
As well as the following or similar USB Fans.
Filter pads can be purchased from Amazon. Including Carbon and other filter pads.
Hope this helps someone else that have limited space.