1 / 7
Bird Feeder Bottle For Whole Sun Flower Seeds — zdjęcie 1
1 / 7

Bird Feeder Bottle For Whole Sun Flower Seeds

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Here is the new updated version without a base, if you want to hang the feeder…

Ocena
0 / 5
Polubienia
16
Pobrania
96
Wydruki
0
Wyświetlenia
801
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Test Models
Licencja
Creative Commons — Attribution

Here is the new updated version without a base, if you want to hang the feeder http://www.thingiverse.com/thing:2181266

Here is a bird feeder to screw on the bottom of an apple juice bottle you get at Wallmart https://www.walmart.com/ip/Great-Value-100-Apple-Juice-96-oz/10415325. This is big enough for whole sunflower seeds to be used. Use some sticks or 8mm wood dowels for the pegs. It has holes for rain water to drain out.

I mount the feeder on a tube of PVC pipe. If you want to hang the feeder, then just lower the print in your slicing software to get rid of the 1 inch bottom stand.

Printed with no support in ABS with active cooling.

Print instructions

Category: 3D Printing Print Settings

Printer Brand: FlashForge

Printer: Creator Pro

Rafts: Yes

Supports: No

Resolution: 0.4

Infill: what ever

Notes:

Printed with no supports in ABS

Tagi