Pistol/Gun for Carbon/Dummy 13 BETA (MOVING SLIDE+Silencer variant) NO GLUE REQ
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
working pistol
- Ocena
- 5 / 5
- Polubienia
- 445
- Pobrania
- 1882
- Wydruki
- 4
- Wyświetlenia
- 7183
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Now your Dummy 13 can have a semi-functioning pistol instead of a boring old static model! Inspired by the moving pump shotgun concept of my previous model, I made a pistol for D13, but with a functioning slide that moves back and forth!
FEATURES
MOVING SLIDE
With a clip concept not unlike what you see in legos, the slide for the pistol is able to slide back and forth, letting your dummy 13 realistically shoot and reload a gun! Not only that, but this could make stop motions using dummy 13s more realistic as well!
TWO VARIANTS
There are two variants available, a normal Glock, and a silenced Glock for more stealthy missions.
MULTICOLOR PRINTING AVAILABLE
If you wanted to make the slide of your Glock a different color, then you're in luck! Each piece is available to print separately, allowing you to customize your gun with different color schemes! As of now, there is only one slide variant available, but I might add more attachments like a red dot sight variant.
I might add also different attachments to the frame and slide in the future, such as red dot sight, or a laser, or a flashlight, just to name a few.
PRINTING
Printed at 0.16 layer height.
I recommend using PLA or PETG for the frame and slide. I printed it in both, and they function equally well.
THIS REQUIRES SUPPORTS. Be careful when removing supports, as being too forceful can damage the print.
I also recommend sanding the area where the supports were, because tolerances are tight, and a layer being a little off can cause problems with the model.
If you enjoyed this model, please consider posting a make. If you had any problems, please comment them so I can address them.
I might make a holster for this; it just depends on how popular this gets.
ASSEMBLY
Put the slide in the locked back position, then push down on to the frame till it clicks in place. Move the slide back and forth a few times to loosen it, then Voilà, you're done!
If people could post makes, that would make me very happy :)
Remember, this is BETA, so I will try and make it better in v1. Please tell me if any problems arise.
Like this? Why not check out some of my other models?
https://www.printables.com/model/1179980-mp5-and-mp5k-for-dummy-13-beta-v1extra-foregrip-sk
https://www.printables.com/model/1222331-shotguns-for-dummy-13-barrel-opens-pump-movesmore
https://www.printables.com/model/1189360-altynk6-3-helmet-for-dummy-13pubg-lvl-3-helmetmova
https://www.printables.com/model/1185916-dummy-13-night-vision-helmetmilitary-helmet-v2-now