FTC spintakes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of the Andymark spintakes, this new rendition is edited to have longer spokes and a hex fitting for 8 mm GoBilda
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 929
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — NoDerivatives
My team and I are using a flexible filament called TPU which is very flimsy and should not be mistaken with stiffer TPU. The purpose of using these rather than enraption stars or surgical tubing is to create a better pushing force in your intake system. My FTC team can vouch for their efficiency in doing so. It is important for any teams that are looking to make these stiffer that you only increase the wall line count since increasing the infill makes the flexing of the spintakes inconsistent and inefficient. Good luck to all FTC teams this year and all teams pursuing a design incorporating these.
- Wall line count: 4
- roof and floor line count: 3
- Infill: 2%
- no supports
- Extruder temp: 240
- Heatbed temp: 50
- Print speed: 20 mm/s
- Travel speed: 90 mm/s