clothes iron cup (LESS MESS!)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
cup for filling a clothes iron with no funnel needed!
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 27
- Wydruki
- 1
- Wyświetlenia
- 87
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Have you ever tried pouring water into your iron and it just spills all over the place because the brim of the cup is too wide? Worry no more! This cup was specifically designed to allow for a smooth pour into a the narrow hole most clothes irons have. No funnel needed!
PRINT TIPS:
Any layer height will work. supports beneath the hanging lip are required. Either organic or snug works fine, although I've seen snug provide better results with less tweaking.
note: as the cup IS 3D printed, there may be a small amount of “sweating” through the plastic, no matter what you do, but since it's usually being used for less than a minute, it should be no problem. I printed one for me and another for my mother and they've worked great since!