1 / 5
Williams pinball moving 5-bank guide rails (B-11406 compatible) from Jackbot — zdjęcie 1
1 / 5

Williams pinball moving 5-bank guide rails (B-11406 compatible) from Jackbot

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a remake of Williams' moving 5 target bank guide rails. This rail part is what breaks in use, yet the it's not…

Ocena
0 / 5
Polubienia
0
Pobrania
10
Wydruki
0
Wyświetlenia
52
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Attribution — Share Alike

This is a remake of Williams' moving 5 target bank guide rails. This rail part is what breaks in use, yet the it's not available as a separate spare part, the official part includes the targets themselves and their back plate.

The target bank is sandwiched in the middle, then the whole thing is bolted to the existing holes of the old mechanism. Note that you need about 1-2mm longer screws, make sure to measure them correctly so they don't go through the playfield!

PTFE grease is suggested for the parts that contact the moving bank.

I have had a prototype made of PLA in use for over 3 years, but I'd suggest using PETG.

Print Settings

Filament Material:

PETG

Category: Toy & Game Accessories

If you want to support my arcade content, I have a Ko-fi account here: https://ko-fi.com/apzpins

Tagi