1 / 6
Williams pinball moving 3-bank guide rails (03-8235 compatible) from Attack from Mars, Who Dunnit, Mousin' Around etc. — zdjęcie 1
1 / 6

Williams pinball moving 3-bank guide rails (03-8235 compatible) from Attack from Mars, Who Dunnit, Mousin' Around etc.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a remake of Williams' moving 3 target bank guide rails, based on my original 5-bank version. This has been…

Ocena
0 / 5
Polubienia
0
Pobrania
10
Wydruki
0
Wyświetlenia
88
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Attribution — Share Alike

This is a remake of Williams' moving 3 target bank guide rails, based on my original 5-bank version. This has been modified by Hopeakuula regular RIK and is released here with his approval.

This part is used in a lot of games, Who Dunnit and Mousin' Around being two examples where I've personally used this printed version.

The part number lookup suggests it should work for following games:

  • Attack From Mars (original and remake)
  • Mousin' Around
  • Who Dunnit
  • Avatar (Stern)
  • Spiderman (Stern)
  • Black Knight 2000

The target bank is sandwiched in the middle, then the whole thing is bolted to the existing holes of the old mechanism. Note that you need about 1-2mm longer screws, make sure to measure them correctly so they don't go through the playfield!

PTFE grease is suggested for the parts that contact the moving bank.

I have had a prototype made of PLA in use for couple of years, but I'd suggest using PETG.

Print Settings

Filament Material:

PETG

Category: Toy & Game Accessories

If you want to support my arcade content, I have a Ko-fi account here: https://ko-fi.com/apzpins

Tagi