1 / 2
Funhouse / Road Show animatronic head jaw gear (03-8471 compatible) — zdjęcie 1
1 / 2

Funhouse / Road Show animatronic head jaw gear (03-8471 compatible)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a gear for Road Show and Funhouse pinball machine animatronic heads' mouth mechanism.

Ocena
0 / 5
Polubienia
4
Pobrania
56
Wydruki
1
Wyświetlenia
188
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Attribution — Share Alike

This is the large gear between the motor and the rail that moves the character jaws. The original has quite often missing teeth or cracks. PETG appears to be strong enough even in commercial use.

An improvement over the original is wider cog; this one can take more beating.

This is compatible with Williams part 03-8471

Fits following games:

  • Funhouse
  • Road Show (Both heads)

 

Design

I measured the original part and used OpenSCAD's Gears library to make this.

Version 2 makes the larger gear a bit taller to fully utilise the contact surface with the motor's gear.

If you want to support my arcade content, I have a Ko-fi account here: https://ko-fi.com/apzpins

Tagi