Jujutsu Kaisen - Tokyo Jujutsu High School uniform button
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,73 € – 0,89 € netto (bez VAT)
Dla pliku: Button_Tokyo_hischool_wider_loop_0.4n_0.2mm_PLA,PLA_MK4SMMU3_46m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,81 € netto (środek widełek).
- Masa podana przez autora
- 11 g
- Czas druku podany przez autora
- 46,2 min
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
I painted the model for printing in multicolor using PrusaSlicer for the MK4S MMU3.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 196
- Wydruki
- 1
- Wyświetlenia
- 596
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I painted the model for printing in multicolor using Prusaslicer for the MK4S MMU3.
I'm uploading the .GCODE to print just one piece, but the .3MF is the painted project. You can add multiples there or other configurations.
Add organic supports. (they can be difficult to remove)
