Marzocco single filter 7g basket funnel with magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've remixed https://www.printables.com/model/127779-marzocco-single-filter-7g-basket-funnel to have holes for magnets
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 63
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The magnets I'm using are cylindrical. 4mm in diameter and 1.5mm high. Simply add a pause in your slicer at height 124, then put some glue down, add the magnet. Once the glue is set, resume the print.
I printed using 0.1mm layer height and elegoo pla + on the flsun v400 with a ruby nozzle.
These are the magnets I used.
Disclaimer: This is an affiliate link, and small way to support the models I make/remix. You can also purchase them by searching “120Pcs Neodymium Magnet, 4mmx1.5mm Small Magnets Strong Refrigerator Magnets for Crafts, Rare Earth Magnets for Dry Erase Board Office Fridge Mini Round Disc Magnet for DIY Building Scientific Models” on amazon.