Little Chick Keychain (Separated Parts)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Little Chick Keychain (Separated Parts)
- Ocena
- 5 / 5
- Polubienia
- 103
- Pobrania
- 507
- Wydruki
- 2
- Wyświetlenia
- 1401
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
💰You can obtain the commercial license for this model by joining my Patreon at the Merchant tier or higher.
🔔For the separated parts version: Please apply glue and gently press the parts together until they snap into place. If the fit isn’t quite right, please adjust the size as needed.
🔔The keychain model is designed to use a 15mm (diameter 0.8mm) ring.
🔔Printing support is not mandatory, but it may enhances the overall quality
🔔Printing in 0.15mm layer height is recommended.
🔔Recommend the Order of Wall: Outer to Inner
🔔You may need to perform post-processing on the models, such as smoothing sharp edges and ensuring the separate parts are securely attached for safety.
🔔Add brim or apply glue to the bottom if extra adhesion is needed.
🔔The rendered images are for reference purposes only, and any silver ring shown in the pictures is not included with the model.
❗Please do a test print to ensure quality before starting a mass print.
🙌This model is made available to you by UniQrint paid members.