1 / 1
Router Mounting plate  for the 60 inch Flattening Sled — zdjęcie 1

Router Mounting plate for the 60 inch Flattening Sled

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a mounting plate for your router to use with the 60" Flattening sled by Vevor.com

Ocena
0 / 5
Polubienia
2
Pobrania
30
Wydruki
0
Wyświetlenia
289
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

This is a mounting plate for your router to use with the 60" Flattening sled by Vevor.com

 

I would suggest printing this with 100% infill. Please note, the mounting plate does NOT have any mounting holes.  The reason is once the router is mounted on the plate you have over 2" inches of clearance between the bottom of the plate and the work piece. By not putting any mounting holes this one plate can be attached to any full sized router by simply drilling the required holes for your router. I just used my existing router baseplate as a guide for the holes. The added advantage is you can position your router as you see fit.

 

Link is for the sled on vevors website  https://www.vevor.com/router-sled-c_10996/vevor-64-162cm-adjustable-router-sled-for-flattening-slabs-with-locking-system-p_010438855845

Tagi