Handle and Strap mount for Shield
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Great for Valor Games, or LARPing. Attaches with 1/4"-20 bolts to wood, use a 1" strap of leather or webbing
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 118
- Wydruki
- 1
- Wyświetlenia
- 254
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
Great for Valor Games, or LARPing. Attaches with 1/4"-20 bolts (¾" long to go through ¼" wood) and large fender washers to wood, use a 1" strap of leather or webbing
I wrapped cotton twine around the handle for better grip, and tied and glued the ends with superglue. I used a ~18" long x 1" wide strap of leather with 2 x 1" d-rings for the arm strap, but it should accept anything up to 1 ¼ “ wide. Webbing and quick release buckles should work fine too, but let ”period authentic".
For strength, I recommend printing the handle on it's side so the layers are mostly continuous instead of letting the handle de-laminate from the mounting points. It avoids most of the supports needed this way too.