1 / 2
Nakamichi 1000 Fader Gasket — zdjęcie 1
1 / 2

Nakamichi 1000 Fader Gasket

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replaces degraded internal gasket with an external one.

Ocena
0 / 5
Polubienia
0
Pobrania
4
Wydruki
0
Wyświetlenia
93
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

The small plastic gasket that sits inside the faders of the Nakamichi 1000 and 1000 MKII degrades over time and breaks apart, often falling inside the fader. This is a replacement external gasket that sits on top of the fader instead of inside. It is recommended to 3D print this part in TPU or a flexible material of your choice
For best results, the fader should be taken apart to remove the remnants of the original gasket, clean the tracks, and relube the fader.