FiiO K7 under table holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2 parts holder with 5mm dilatation for ability to take the AMP out without unscrewing. 3mm lip for better stability.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 229
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
It should be printed twice, so one part can be mounted to the front and another one to the back. 3mm lip and holes for rubber feet help with the stability.
I have made it with a dilatation, to make it easy to take out by just pushing it up and sliding through the front. Unless you push it from the bottom, it stays perfectly in place.
Each bracket has 2 mounting holes for 4mm screws with sink hole for 8mm 90deg screw head.
I printed it in PET-G with fuzzy skin on the non functioning faces. I have also added a version with no dilatation if preferred.