Hand-Screw Clamp - Long Threads
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
When I showed my prints of the original design to my brother he asked me if I can print few for him. He is scale…
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 47
- Wydruki
- 1
- Wyświetlenia
- 350
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
When I showed my prints of the original design to my brother he asked me if I can print few for him. He is scale models builder and he need such clamps. But for his projects a little bit longer threads will be a nice to have. I did remix of Threadsx2.stl element to have them longer: 2x and 3x. Printing in ABS (like me) could be a little challenge without wrapping so you can use the version with holding pads.
Preview shows some nasty connecting points but the 3D view is OK. And of course the stl could be sliced and printed without problems as you can see on pictures.
Oryginal design: https://www.thingiverse.com/thing:2403756
Category: Hand Tools